So, I decided to mess around with my 80 max dallas build today. It’s been a while, and I figured I’d see if I could push it a little further. I’ve always loved tinkering with this setup, trying to squeeze every last drop of performance out of it.
First thing I did was dust everything off. Seriously, you wouldn’t believe how much gunk builds up. I carefully took everything apart, cleaned all the components, and made sure the fans were spinning freely. It’s like giving it a spa day, really.
Then I started looking at the configuration.I wanted to see if I could optimize the *’s a lot of trial and error, tweaking settings and seeing what happens.
- Checked the existing configuration.
- Made some minor adjustments based on my notes from last time.
- Saved a backup of the original settings, just in case. Always a good idea!
The Testing Phase
The testing starts. I loaded up the dallas, and observed. The result were not bad.
After a few hours of fiddling, I managed to get some decent *’s not perfect, but it’s definitely an improvement. And honestly, that’s half the fun, right? The process of figuring things out, making little tweaks, and seeing what works.
I’m going to keep messing with it over the next few days. Maybe I’ll try a different setting, I don’t know yet. But that’s the beauty of it – it’s a never-ending project. And it’s always satisfying to see those numbers inch up, even just a little bit.
